Honeywell VE series solenoid valves can be used for fuel supply control of various gas burners, with solenoid valves ranging from DN10 to DN100; Including fast opening and closing, slow opening and closing, flow regulation, threaded or flange connection; Various models such as normally closed and normally open are available for selection.
I. Product Basic Information
Brand: Honeywell
Model: VE408AA1007
Type: Ignition Solenoid Valve (VE400AA Series)
Connection Type: Threaded Connection
Channel Position: Two-way
Material: Cast Aluminum (Valve Body), may include Brass, etc. (specific materials may vary based on the actual product)
Origin: USA
II. Technical Specifications
Applicable Media: Natural gas, coal gas, liquefied gas, and air (please refer to the product manual for specific applicable scope)
Nominal Diameter: According to different sources, there are two versions mentioning 8mm and 1/4 inch (approximately 6.35mm), please refer to the actual product for accuracy
Supply Voltage: Commonly used type is 220Vac, 50/60Hz; some sources mention 230Vac, please refer to the product label or manual for actual use
Operating Pressure: Maximum gas supply pressure up to 500mbar (please refer to the product manual for specific operating pressure range)
Operating Temperature: Ambient operating temperature ranges from -15°C to +60°C (some sources mention -18°C to +60°C)
Protection Level: IP54, optional IP65 (please refer to the product manual for specific protection level)
Operation Mode: On/Off type, Normally Closed Solenoid Valve (valve closes when power is off)
Opening and Closing Time:
VE4000A/B Type: Valve opening time less than 1 second, opening frequency less than 20 times/minute
VE4000C Type: Valve opening time adjustable from 5-30 seconds, opening frequency less than 1 time/minute
Solenoid valve closing time less than 1 second
III. Product Features
High Reliability: The VE408AA1007 adopts high-quality materials and advanced manufacturing processes to ensure product reliability and durability.
Quick Response: Fast opening and closing times improve system response speed and efficiency.
Easy Installation: Threaded connection makes installation simple and quick, reducing installation costs.
Simple Maintenance: The compact structure of the solenoid valve facilitates easy maintenance and reduces maintenance costs.
Good Safety: Complies with relevant safety standards and features overcurrent and overvoltage protection to ensure safety during use.
IV. Application Scenarios
The Honeywell VE408AA1007 gas solenoid valve is suitable for fuel supply control in various industrial burners, such as boilers, furnaces, incinerators, and other gas equipment for ignition and flame monitoring. It achieves automation and efficiency in the combustion process through precise control of gas flow and timing.
V. Precautions
Please read the product manual carefully before installation and use to ensure proper installation and use.
Do not install or use this product in environments where special chemicals or corrosive gases are present.
Do not use this product in damp, high-temperature, or continuously vibrating environments.
To prevent electric shock and instrument damage, connect the power supply last.
Do not overload the product; ensure that the load connected to each terminal does not exceed the rated value.
