The combustion machine is widely used, with a simple igniter structure and reliable operation. The main combustion part can be controlled for high and low levels. It is designed with a 2mm thick high-strength air jet board, and the box is made of high-strength stainless steel material. Its main use is as a baking oven (coating metal, plywood, resin, etc.) and a drying oven (drying fiber, food, printing, metal moisture removal, etc.). Heating furnace (preheating furnace, pre-treatment furnace, foaming furnace, heat setting furnace, combustion type oil removal furnace, etc.) deodorization treatment (direct combustion deodorization, catalytic deodorization, etc.). Other areas that require hot air treatment
Precautions for using this device: The supply pressure of gas during standard combustion is liquefied gas: 2. 8KPA (280MMAQ) natural gas 2. 0KPA (200MMAQ) combustion air volume 130N. The combustion air pressure is 0. 6Kpa (61mmAq) mother flame has a calorific value of 11. When using 6KW (1000Kcal/h) standard combustion, the visible flame length is 1000mm, and the air velocity inside the burner pipeline is 5-20M/S, with an internal pressure of -0. 5-0. 5kpa (-51mmAq) pipeline internal pressure (when installing corners) -0. 5-0kpa - (-51-0mmAq) The upper temperature limit at the rear of the burner is 350 degrees, and the upper temperature limit at the front of the burner is 800 degrees. The burner must be installed in the center of the pipeline, and the wind speed passing through the burner must be equal. The distance between the burner and the pipeline, as well as the distance between the burners, must be maintained at least 100mm.
model | Calorific value kw（kcal/h） | width（MM） | height（MM） | thickness（MM） | weight（kg） |
DCM-10 | 116（100，000） | 156 | 173 | 260 | 7．5 |
DCM-20 | 233（200，000） | 306 | 173 | 260 | 11．0 |
DCM-30 | 349（300，000） | 456 | 173 | 260 | 14．5 |
DCM-40 | 466（400，000） | 606 | 173 | 300 | 27．3 |
DCM-50 | 582（500，000） | 756 | 173 | 300 | 22．5 |
DCM-60 | 698（600，000） | 906 | 173 | 300 | 38．0 |
