C7061 Dynamic Self Test UV Flame Detector
The dynamic self checking flame detector, combined with the product R7861 dynamic self checking amplifier, is used to detect ultraviolet rays generated by the combustion of various fuels such as gas and fuel.
Characteristics and advantages of C7061 dynamic self checking ultraviolet flame detector
The oscillating shutter blocks ultraviolet light from reaching the ultraviolet sensor, providing a self check function for the ultraviolet sensor.
The 7800 series controller detects amplifier circuit components through the microprocessor inside the CR7890B controller.
Can be installed at any angle from horizontal to vertical. (including horizontal and vertical)
The detector has a panel installation direction control point to ensure the correct operation of the shutter mechanism.
On site replaceable UV sensing tubes and quartz observation ports.
Suitable connecting pipes and color coded wires allow for quick electrical connections.
Two detectors can be connected in parallel, greatly reducing the probability of failure shutdown that is difficult to observe.
The insulation device is embedded in the installation flange.
With -40 F (-40 C) standard UV sensor.
Application: Gas burner; Fuel burner
Size approximately: (133 mm diameter (including mounting flange) x 183 mm length)
Frequency: 50 Hz; 60 Hz
Environmental temperature range: -40 F to+175 F (-40 C to+79 C)
Description: Dynamic self checking flame detector
Weight: 2.6 lb (1.2 kg)
Supporting product: Flame amplifier: R7861
